Orchestral Zone


Look at the size of this one!!

bk2009

The WHOOPEE BAND have performed on stage and TV in most European countries, had their own 45 minute TV show in Germany, not to mention their very own TV series for London Weekend Television in the 70’s, it was called “Making Whoopee”. They have worked with many leading stars including Lionel Bart, Peter Cook & Dudley More and Max Wall. They have toured with Ralph McTell, Manhattan Transfer and many more.

Such is the bizarre nature of this outfit they not only play Theatres and Festivals all over Europe and beyond, they even played at the legendary BOB DYLAN concerts in Earls Court London in the late seventies and when Roger Daltrey of The Who got married they even played at his wedding. The WHOOPEE BAND have appeared in concert at the Philharmonic Hall in St. Petersburg, Russia and in Denmark with Dame Edna Everage …………in various concerts with Chris Barber, Kenny Ball, Lonnie Donegan and Acker Bilk plus many many more………If Musicians are have a “do” who do they book? 

Bob Kerr served his “apprenticeship” with such bands as The Temperance Seven, The Bonzo Dog Doo-Dah Band and the New Vaudeville Band………….. Remember “Winchester Cathedral” ? well it was Bob who was chosen to sing this song through that now famous megaphone on Top of the Pops and the London Palladium to The Ed Sullivan Show in New York and most of the world all those years ago.

Bob has been running his WHOOPEE BAND since the late sixties. In this time the band have made many LP’s, CD’s, singles and Video’s and appeared in several major films.

Bob and the Boys regular travels over the last few years have taken them to Germany, France, Holland, Belgium, Austria, Denmark, Sweden, Finland, Norway, The Faro Isles, Iceland, Italy, Russia, Spain and of course Great Britain, playing Theatres, Music Festivals, Clubs and making regular appearances on TV in many countries (including Russia where their show was seen by 280 million people) .



Stagg Trumpets For Under £100
October 27, 2008, 11:47 am
Filed under: Brass Instruments | Tags: , , ,

Going on holiday and want to keep your lip in?

Just throw one in your case,takes less room that a full size trumpet- better than just your mouthpiece.

Christmas Party Time-get into the party spirit!

Pocket Trumpet, in ABS case – Stainless steel pistons – 3rd tuning slide finger ring – Bell: 105 mm or 4 1/8 in. – Bore: 11.7 mm/ 7/16 in. – Clear-lacquered body.

Stand out from the crowd and play these “funky” coloured trumpets! Available in  Black, Blue and Red finishes, as well as in the more conventional clear-laquered finish.

Costing only £99 each, these trumpets are quite a bargain!

Features

  • Trumpet. Stainless steel pistons.
  • First valve slide saddle.
  • Third valve slide finger ring and slide saddle.
  • lacquered colour; clear,black,blue or silver plated

    View models and stock availability here.



Dolphin Trumpet Care Kit

Dolphin Trumpet Care Kit

This Trumpet Brass Care Kit contains everything you’ll need to keep your instrument in tip-top condition for many years to come: Valve Oil, Tuning Slide Grease, Nylon Flexible Brush, Valve Brush, Mouthpiece Brush and Polishing Cloth.

SUPER SLICK
OILS AND MAINTENANCE MATERIAL

Trumpet, Cornet, and Flugelhorn
 Maintenance Manual
   
  Caring for Your Instrument
   
  The following care is recommended to extend the life and maintain the quality of your instrument.
   
  Take extra care to prevent exposure to sudden changes in temperature and humidity. Avoid direct, extended exposure to:
   • Sunlight      • Rain      • Heaters      • Air Conditioners
   
  Remove all moisture after you have finished playing.
   
  Refer to Caring for the Interior of your Instrument for detailed instructions.
   
   
  Assembling Your Instrument
  Assemble, tune, clean and lubricate your instrument for the first time under the guidance of your teacher.
   
  Inserting the Mouthpiece
  The mouthpiece and mouthpiece receiver are easily damaged by improper assembly. Insert the mouthpiece into the receiver, giving it a slight twist to secure it. Never force a mouthpiece into place, as it may become stuck. If this should happen, take the horn to your local dealer or band director to have it removed, they will have a special tool to remove stuck mouthpieces.Never use pliers or other gripping tools to remove a stuck mouthpiece.
   
  Tuning Your Instrument
  Trumpet01.gif • Pitch is affected by temperature, so be sure to warm up your instrument before playing by blowing air through it.
   
  Trumpet02.gif • To tune trumpets and cornets, adjust the tuning slide until you achieve the desired pitch. (For flugelhorns, the mouthpipe acts as a tuning slide.)
   
  Caring for the Interior of Your Instrument
   
  Caring for Valves and Valve Casings
  The valves and valve casings are very important parts of your instrument. Take extra care not to bend or scratch them. These steps should be followed before and after each use of the instrument.
   
  Applying Oil to the Valves
   
  • Unscrew the top valve cap from the valve casing. 
  • Pull out the valve in a straight line-do not twist.
  • Apply valve oil ,coating the entire valve.
   
  • Place the valve carefully back into the proper casing, aligning the valve guide with the guide slot. Tighten the top valve cap. Move up and down to ensure even oil coating over the entire surface. If there is any damage to the valves or valve casings, take your instrument to your dealer for repair. Trumpet03.gif
   
  Caring for the Slides
  Slide grease  keeps slides airtight and maintains smooth movement. It is an essential factor in the care of your horn. It is important to check your slides each time you play your instrument.
   
  Applying Slide Grease
  •Remove slide while pressing the corresponding piston.
  •Wipe any dirt from the surface of the inner slides. Apply a small amount of slide grease evenly around the slide tube.
  •Replace the slide, working it in to ensure that the grease is thoroughly and evenly spread.
   
  tuning slide oil  is recommended for instrument and cornet 1st and 3rd tuning slides. If there is any damage to the slides, take your instrument to your dealer for repair.   Trumpet04.gif
   
  Cleaning the Water Keys
  A tone hole cleaner  may be used to clean and dry the water keys.
   
  Cleaning the Mouthpiece
  • Soak the mouthpiece in a solution of warm soapy water. Using a brass mouthpiece brush scrub the inside and outside.
  • Rinse thoroughly with clean, warm water.
   
  Caring for the Exterior of Your Instrument
   
  Make sure to use a polishing cloth  to remove dust and fingerprints after you play.
   
  Storing the Instrument
   
 
Trumpet05.gif
…. Always use your case for storing the instrument after playing and for transporting. Be sure the mouthpiece and other accessories are secured tightly, as they can scratch and dent your horn if they come loose during transportation. Do not put anything in the case that could place pressure on the instrument. To keep your instrument in optimum playing condition, have it professionally cleaned and inspected by a qualified repair technician annually.


Yamaha Silent Brass Systems – Silence has never sounded so good

Brass Playing Essentials

The Yamaha Silent Brass System gives you the flexibility you need to practice anywhere, at any time. This innovative system offers players the ability to practice in almost any environment without disturbing others and is the must have accessory for any brass player.

Perfect for students in halls of residence, touring musicians staying in hotel rooms, those living in flats or just those a bit timid about having others hear their not so perfect notes. The Silent Brass System, unlike other practice mutes, reproduces the real sound of the instrument through a pickup microphone built into the mute. The natural sound can then be heard by the player through earphones whilst others hear only a whisper. This prevents over blowing and allows you to play loud or soft, high or low, with your pitch remaining true and centred.

The personal studio can be used to add to your practice experience and can convert the sound to mimic the acoustics of a larger room. An Aux-In allows you the facility to practice orchestral or band music alongside a recording. The Personal Studio is easy to use and small enough to fit in a shirt pocket and offers a choice of ‘clean’ or echo enhanced sound.

The most revolutionary, and appealing quality of the Silent Brass is the even and consistent intonation. When compared with conventional mutes, the Silent Brass mute performs closely with that of open playing. This close relationship ensures more productive practice which leads to greater results, quicker.

The Silent Brass System is a fantastic solution to brass players practicing needs. Ideal to use, even when the rest of your family are sleeping and perfect for the travelling musician, the Silent Brass system is an essential accessory for all brass players.



Dolphin Trombone Care Kit

Dolphin Trombone Care Kit

This Trombone Brass Care Kit contains everything you’ll need to keep your instrument in tip-top condition for many years to come: Slide Oil, Tuning Slide Grease, Nylon Flexible Brush, , Mouthpiece Brush and Polishing Cloth.

SUPER SLICK
OILS AND MAINTENANCE MATERIAL

Caring for Your Trombone
  The following care is recommended to extend the life and maintain the quality of your trombone.
   
  Take extra care to prevent exposure to sudden changes in temperature and humidity. Avoid direct, extended exposure to:
  • Sunlight    • Rain    • Heaters   • Air Conditioners
   
  Remove all moisture after you have finished playing.
   
  Refer to Caring for the Interior of your Trombone for detailed instructions.
   
  Assembling Your Trombone
  Assemble, tune, clean and lubricate your instrument for the first time under the guidance of your teacher.
   
  • Insert the slide section into the bell section. The slide should be to the right of the bell at a 90° angle. The bell and slide should not make contact.
   
  Trombone01.gif • Tighten the bell lock to secure the sections together.• Always hold your trombone by the slide brace while resting and make sure the slide lock is locked when the trombone is not in use. 
   
  Inserting the Mouthpiece
  The mouthpiece and mouthpiece receiver are easily damaged by improper assembly. Insert the mouthpiece into the receiver, giving it a slight twist to secure it. Never force a mouthpiece into place, as it may become stuck. If this should happen, take the horn to your local dealer or band director to have it removed, they will have a special tool to remove stuck mouthpieces. Never use pliers or other gripping tools to remove a stuck mouthpiece.
   
  Tuning Your Trombone
 
Trombone02.gif
• Pitch is affected by temperature, so be sure to warm up your instrument before playing by blowing air through it.• Tuning your trombone is done by adjusting the tuning slide until you achieve the desired pitch.

 

   
  Care for the Interior of Your Trombone
  Lubricating the Hand Slide
  • Carefully remove the outer slide and lay it on a clean, flat surface.• Wipe inner slide clean of old cream, dirt, and foreign substances.

 

Trombone03.gif
  •Apply a small amount of slide cream  to the stocking of the inner slides (the part that is slightly thicker than the rest). Spread evenly, until it is coated with a thin film. Do not apply too much slide cream as this will hinder the movement of the slides.
   
  • Use a  trombone spray bottle  to spray water evenly over the inner slides. (Note:  liquid cream  may be used instead of slide cream and water. Apply in the same manner, spreading a thin, even film over the stocking of the inner slides.)   Trombone04.gif
  • Replace the outer slide, moving it back and forth to spread the lubricant evenly.
   
  Lubricating the Tuning Slide
   slide grease  keeps slides airtight and maintains smooth movement. It is an essential factor in the care of your horn. To apply slide grease:
   
  • Remove each tuning slide and wipe clean of dirt and foreign substances.• Apply a thin coating of slide grease to the inner slide surfaces. Replace the slide, working it in to ensure that the grease is evenly and thoroughly spread. Trombone05.gif
   
  Oiling the Rotary Valve
  The rotary valve must be oiled prior to assembly of the trombone.
   
  • Remove the complete hand slide assembly and place it on a clean, even surface.• Hold bell section with the bell pointed up.

• Place a few drops of  rotor oil  into the slide receiver.

Trombone06.gif
   
  • Depress lever to activate the rotary valve, spreading the oil evenly on the rotor and casing.• Apply a few drops of  rotor spindle oil  to the rotor stem, directly between the stop arm and the top of the casing. Trombone07.gif
  • Carefully remove valve cap and apply a few drops of rotor spindle oil to the bearings. Activate rotor and replace the cap.
  • Apply a drop of  lever oil  to each linkage of the lever assembly.
  NOTE: Do not remove the rotary valve. This should be done only by a qualified repair technician during periodic maintenance.  
   
  Restringing the Rotary Valve (when applicable)
  NOTE: Only use string designed specifically for rotary valves.
  You will need a small screwdriver, scissors and rotary string to restring your valves. Please follow these directions carefully:
  • Lay the bell section of the trombone flat, with bell pointing toward you. Inner components should appear as in illustration shown below.
 
Trombone09.gif
  • Loosen screws (C) and (E) with small screwdriver. Cut a piece of string approximately nine inches long and tie a knot in one end. Begin by threading the string through the hole at bottom of rod (A). Start from the outside of the rod and thread toward the valve. The knot must provide a stop at the hole.
  • With the stop arm (B) to the right of rod (A), bring the string around the top of the rotor stem in a clockwise direction, then loop the string entirely around the small screw (C) in a counter-clockwise direction.
  • Continue around the bottom of the stop arm (B) to the hole (D) near the top of the rod. Thread the string through this hole and loop it under the head of the small screw (E) on the rod in a clockwise direction.
  • Now pull the string fairly taut so that no lost motion occurs when depressing the trigger lever. Tighten screw (E) enough to hold the lever in place.
  • Position the lever so the string rod is parallel to the rotor casing top.
  • Tighten the string screw (C).
   
  Cleaning the Mouthpiece
  • Soak the mouthpiece in a solution of warm soapy water. Using a brass mouthpiece brush , scrub the inside and outside.
  • Rinse thoroughly with clean, warm water.
   
  Cleaning the Water Keys
  A tone hole cleaner  may be used to clean and dry the water keys.
   
  Care for the Exterior of Your Trombone
  For daily care, use a  polishing cloth  to remove dust and fingerprints.
   
  Storing the Instrument
  The case should always be used for storing the instrument after playing and transporting. Be sure the mouthpiece and other accessories are secured tightly, as they can scratch and dent your horn if they fall loose during transportation. Do not put anything in the case that could place pressure on the instrument.
 
Trombone10.gif
To keep your instrument in optimum playing condition, have it professionally cleaned and inspected by a qualified repair technician annually.Yamaha Knowledgebase


Dolphin Large Brass Care Kit

Dolphin Large Brass Care Kit

This Large Brass Care Kit contains everything you’ll need to keep your instrument in tip-top condition for many years to come: Valve Oil, Tuning Slide Grease, Nylon Flexible Brush, Valve Brush, Mouthpiece Brush and Polishing Cloth.

SUPER SLICK
OILS AND MAINTENANCE MATERIAL

 

 

Caring for Your Low Brass Instrument
  The following care is recommended to extend the life and maintain the quality of your low brass instrument.
   
  Take extra care to prevent exposure to sudden changes in temperature and humidity. Avoid direct, extended exposure to:
  • Sunlight    • Rain    • Heaters     • Air Conditioners
  Remove all moisture after you have finished playing.
   
  Refer to Caring for the Interior of your Low Brass Instrument for detailed instructions.
   
  Assembling Your Low Brass Instrument
  Assemble, tune, clean and lubricate your instrument for the first time under the guidance of your teacher.
   
  Inserting the Mouthpiece
  The mouthpiece and mouthpiece receiver are easily damaged by improper assembly. Insert the mouthpiece into the receiver, giving it a slight twist to secure it. Never force a mouthpiece into place, as it may become stuck. If this should happen, take the horn to your local dealer or band director to have it removed. They will have a special tool to remove stuck mouthpieces.Never use pliers or other gripping tools to remove a stuck mouthpiece.
   
  Tuning Your Low Brass Instrument
  • Pitch is affected by temperature, so be sure to warm up your instrument before playing by blowing air through it.
   
  • To tune low brass instruments, adjust the tuning slide until you achieve the desired pitch.• To fine tune your horn, adjust the individual tuning slides connected to each valve casing. Consult your instructor when doing this for the first time.

 

LowBrass01.gif
   
  Caring for the Interior of Your Low Brass Instrument
  Care of Valves and Valve Casings
…. The valves and valve casings are very important parts of your instrument. Take extra care not to bend or scratch them. The following steps should be taken before and after each use of the horn.
   
  Applying Oil to the Valves
  • Unscrew the top valve cap from the valve casing.
  • Pull out the valve in a straight line — do not twist.
  • Apply valve oil,coating the entire valve.
  • Place the valve carefully back into the proper casing, aligning the valve guide with the guide slot. Tighten the top valve cap. Move up and down to ensure even oil coating over the entire surface.
   
  If there is any damage to the valves or valve casings, take your instrument to your dealer for repair.
   
  Oiling the Rotary Valves
  • Remove valve slides one at a time.
  • Place several drops of rotor oil evenly into the valve slide, insert slide all the way back into slide tube, then turn horn over to let the oil run on to the rotor.
  • Depress lever to activate appropriate rotary valve, spreading the oil evenly on the rotor and casing. Do steps 1-3 until all rotors are oiled.
  1. Apply a few drops of rotor spindle oil  to the rotor stem between the stop arm and the casing. 2. Carefully remove valve cap and apply a few drops of rotor spindle oil to the bearings. Activate rotor and replace the cap. 3. Apply a drop of lever oil  to each linkage of the lever assembly. LowBrass02.gif
  NOTE: Do not remove the rotary valves. Only a qualified repair technician should do this during annual maintenance.
   
  Lubricating the Tuning Slides
  Slide grease  keeps slides airtight and maintains smooth movement. It is an essential factor in the care of your horn. To apply slide grease:
   
  • Remove slide while pressing the corresponding valve. Wipe clean of dirt and foreign substances.
  • Apply a thin layer of tuning slide grease  to the inner slide surfaces.• Replace the slide, working it in to ensure that the grease is evenly and thoroughly spread. LowBrass03.gif
   
  Cleaning the Water Keys
  A tone hole cleaner  may be used to clean and dry water keys.
   
  Cleaning the Mouthpiece
  • Soak the mouthpiece in a solution of warm soapy water. Using a brass mouthpiece brush scrub the inside and outside of the mouthpiece.
  • Rinse thoroughly with clean, warm water.
   
  Restringing the Rotary Valve
  Note: Only use string designed specifically for rotary valves.
  You will need a small screwdriver, scissors and rotary string to restring your valves. Please follow these directions carefully:
  • Rotary valve components should appear as in illustration 1 when the rotor stem is to the left of the rod, or as in illustration 2 when the rotor stem is to the right of the rod.
  • Loosen screws (C) and (E) with a small screwdriver. Cut a piece of string approximately nine inches long and tie a knot in one end. Begin by threading the string through the hole at the bottom of the rod (A). Start from the outside of the rod and thread toward the valve. The knot must provide a stop at the hole.
  • With the stop arm (B) to the right of the rod (A), bring the string around the top of the rotor stem in a clockwise direction, then loop the string entirely around the small screw (C) in a counter clock-wise direction.
  • Continue around the bottom of the stop arm (B) to the hole (D) near the top of the rod. Thread the string through this hole and loop it under the head of the small screw (E) on the rod in a clockwise direction.
  • Now pull the string fairly taut so that no lost motion occurs when depressing the trigger lever. Tighten screw (E) enough to hold the lever in place.
  • Position the lever so the string rod is parallel to the rotor-casing top.
  • Tighten the string screw. (C).
  LowBrass04.gif.LowBrass05.gif
   
  Caring for the Exterior of Your Low Brass Instrument
  For daily care, use a polishing cloth  to remove dust and fingerprints.
   
  Storing the Instrument
   
 
LowBrass06.gif
  The case should always be used for storing the instrument after playing and for transporting. Be sure the mouthpiece and other accessories are secured tightly, as they can scratch and dent your horn if they fall loose during transportation. Do not put anything in the case that could place pressure on the instrument.
   
  To keep your instrument in optimum playing condition, have it professionally cleaned and inspected by a qualified repair technician annually.Yamaha Knowledgebase



Production Delays on Yamaha Low/Intermediate Brass Instruments.

Yamaha says;“We are writing to apologise and inform you of the severe production delay of Yamaha Low and Intermediate Brass Instruments which we are going to experience in the next 3 months.”
Due to an unprecedented increase in global demand for Yamaha Brass instruments in the first half of this year, nearly double the amount for the same period last year, we have been unable to meet our total production requests.

Concerto B Flat Trumpet  Great alternative to the YTR4335

Designed by makers with over 40 years experience in making brass instruments.

Intermediate Series, Medium-weight Bb trumpet, Gold-brass bell, Bell: 123mm (4-7/8″), ML bore: 11.65mm (0.459 “) , Finish: Gold lacquer, Mouthpiece: The TR303 has been designed by the same team that produces our top-of-the-line professional models and shares many of the same qualities, like a rich full tone with accurate intonation, and the ability to either blend with the ensemble or project a solo. It features Monel pistons for quick and reliable valve action, a gold-brass bell for warm rich tone. The entire inner bore taper-from mouthpiece receiver to the bell-has been scientifically designed for beautiful tone color, comfortable response, and as much sound as you want



Interview with Wayne Bergeron

Wayne Bergeron is now enjoying a career as one of the most active players on the Los Angeles scene. With studio dates, International touring, jazz concerts, guest soloist appearances and clinics he has no intention of slowing down.

Wayne is currently on staff at California State University Northridge where he manages to find time to teach privately. His skills have taken him to different parts of the globe as a clinician/soloist.

“Since my line of work covers a lot of ground musically, I need an instrument that responds to these needs. The YTR-8335LA is the most versatile Bb trumpet I have ever played – from the scoring stage to soaring over a big band, the Yamaha 8335LA delivers the full spectrum of tone colors needed to get the job done.”

Watch an interesting interview with Wayne at the Yamaha Hub Site.

And we’ll leave you with one of his outstanding live performances…enjoy!